Cable construction should focus on good single-disc test

Single-disc test fiber cable line construction is a very important aspect. It is mainly after the use of optical time domain reflectometer (OTDR), optical disc on a single length of optical fiber attenuation coefficient and scattering curves were measured after inspection, to determine whether the cable's key performance indicators to project design and procurement requirements, and provide the basis for the cable distribution site.

Single-disc test fiber cable quality is also defined responsibilities and an important part of project construction. Cable in the production, storage and long-distance transportation, the fiber may be damaged. According to "Military fiber optic cable construction and acceptance of digital transmission systems engineering technical specifications" requirement, in the optical disk shipped to the construction site, you must on each fiber of each cable tray test (detection rate 100%), consistent with technical indicators before they can be with plate and laying. However, some construction units do not pay attention to this link, that manufacturers have already provided relevant information, the test is carried out sampling (detection rate of 50% or less), or just check for a fiber length, other indicators be neglected in more even are, simply do not do a single disk test, this is very wrong. Once the cable laying fiber optic cable was found after completion of performance failure, it is difficult to distinguish between fiber quality or construction quality.

Based on years of construction experience, we believe that the construction should be strictly in accordance with the procedure, do a good job single-disk test, to ensure quality. The main procedures are as follows:

The first step: check the information: to reach test at the scene, should first check the cable factory quality certificate, and check the factory single-disc test data provided are complete, its content, including cable type, core number, length, end other, structural sections map and sequence of fiber-fiber, attenuation coefficient, refractive index and so on, to see whether the order contract required.

Step Two: Appearance check: mainly the optical disc packaging for damage during transport, and then check the cable opening with or without skin damage, cable skin print writing is clear, wear resistant, cable terminations packaging is intact. The existing problems, should make a detailed record, in the optical index test, key test should be done.

Third step: check the other side: from the outside to open stripped cable ends about 30cm, according to optical beam (or optical fiber ribbon) cable outside the chromatographic reason and do not judge, and contrast with the information provided by the factory to see if there are errors . Then in the cable tray cable side marked A, B-side to facilitate cable laying.

Step Four: Fiber Inspection: Stripper fiber loose tube about 20cm, clean optical fiber, optical fiber core number and check whether there are errors chromatography, and determine the optical fiber sequence.

Step Five: Testing technical indicators: measured with the activities of the connector to connect fiber optic pigtails and testing, OTDR testing and then the fiber length, the average loss, and the factory test target with the optical contrast, look for errors. View fiber after taking the curve to the scattering and reflection of whether the peak attenuation level. The entire fiber optic cable in there as long as there is a broken fiber, attenuation exceeded its apparent attenuation level or reflection peaks (not including the fiber end reflection peaks) should be regarded as substandard products.

Step Six: Check the electrical characteristics: If there are to much for cable or monitoring of the metal wire pairs should be tested on the electrical characteristics of wire indicators to see whether the national standards.

Step Seven: Waterproof performance check: test metal sheathed cable, metal parts such as strengthening the insulation resistance to ground to see whether the factory standards.

Step eight: Recovery Package: testing is completed, the first cut of light apparent reason Qi, with the heat shrink tube ends can be sealed, and then pull the cable shrouded in a fixed cable tray and cable tray in the same time, restoration of optical disc packaging.

In the process of optical single-disk test, should also pay attention to the following questions:

1, optical fiber cable in the surplus in the calculation: when tested with the OTDR, the fiber is longer than the length of cable that is fiber-optic cable in the surplus in the degree. And this margin of manufacturers do not usually provide, but it is also indispensable to maintain fiber optic cable line a parameter. We can be calculated by the following formula: degree = slim 梅 surplus cable length - 1. Thus, we maintain the course of optical cable, you can OTDR measured margin of fiber length and to determine the exact location of cable fault location: cable length = slim 梅 (1 + surplus degrees).

2, optical fiber attenuation coefficient test: OTDR testing with certain optical attenuation coefficient of error, the same fibers of different OTDR testing, the test results may not be the same, that is the same OTDR set different parameters, test results may not be the same. So, as long as the test results in the standard range, but with little difference between the data provided by the manufacturer, should be regarded as qualified. The test results exceeded the standard, not blindly to a conclusion, should a change of OTDR parameters or work environment, or for an OTDR to repeatedly test, compare, see if it really excessive.

3, "Magic peak" phenomenon: "Magic peak" phenomenon known as "ghost" phenomenon, which is in the use of OTDR test optical fiber, optical pulses in optical fibers due to multiple reflections, the fiber optic backscatter curve formed a reflective peak. Because of this reflection peak is formed with the fiber fracture is very similar to the reflection peak, the tester is easy to "magic peak" is formed as a fiber breakage caused by the reflection peak of misjudgment. Therefore, the optical scattering curve after the peak reflection occurs, it is necessary for further analysis, may come and go test pulse, measuring the length or the wavelength of measurement several times to compare the identification. If you can not judge, can be measured from the other side, or replacement of test instruments, re-measurement.

Has been identified as unqualified for the optical disc products, to register a clear, timely reporting and contact with manufacturers.







相关链接:



Zhu Pengju: CAD is even more "integration" of the operation



Using VMware, vowed to computer "cloned a technique"



win2000 registry



Mito Xiu 1 minute to create non-mainstream days



Do not heat to high speed fully Raiders SUMMER Thunder



Send anonymous text message express your



Games ARCADE Specialist



MKV to VOB



MTS to MOV



China Business Daily: Who is the end of the traditional MP4



RM To AVI



Department of soft-set and sub-scores by major strategy [1]



Some Tips On Data Collection



Review Dial Up And Connection Tools

Visual Basic to create "five star" level control

Figure 1 "five-star" level control

This control looks great and provides a good graphical way to view the grade, but according to editorial experience, I find it especially cool. When the mouse hover over the bar when, Windows Media Player highlights one of the stars to show you the current float of its value on the bar, thus providing a good graphical feedback. In a variety of Web sites (including Netflix and Amazon), you can find the same type of user interface, and I think in their own applications have this feature, so I decided to create my own control. I'll use Windows Forms controls that the user interface elements to simulate the same time try to make it custom with sufficient capacity to be used in various environments.

Getting Started

The first step is to create a new Class Library project to hold the controls and empty Windows application to a test project. Although the Windows Control Library project template appears to be more appropriate, and it is well to work, but by default, the project includes user controls (user controls 鈹?General for composite control contains one or more controls for Windows Forms control), and I need is an empty class file. Next, you must present a new empty class inherits from the System.Windows.Forms.Control, which simply add a single class declaration can be achieved:

Public Class Ratings
Inherits System.Windows.Forms.Control End Class

If you try to use only IntelliSense? Add Inherits statement, will encounter a small problem: use Class Library template to start your project will not add a reference to the System.Windows.Forms assembly, so you need to manually add. At this point, be the first to add a reference to an System.Drawing.dll, because the final drawing to use custom controls. From now on, I generally follow the following steps to carry out all of the control development:

1. To add custom drawing control standards constructor, set the control style of all the necessary controls in order to correct the drawing and smooth as possible.

Public Sub New ()
Me.SetStyle (ControlStyles.AllPaintingInWmPaint, True)
Me.SetStyle (ControlStyles.DoubleBuffer, True)
Me.SetStyle (ControlStyles.ResizeRedraw, True)
Me.SetStyle (ControlStyles.UserPaint, True)
...''Add any additional initialization code here
End Sub

2. Paper record configuration control behavior and appearance may need to list the public properties.

3. All these attributes add to the private member variable (I prefer to use Hungarian notation in front of each variable to add the prefix "m_" to represent the internal variables), and includes the appropriate default values, as shown below.

Private m_FilledImage As Image
Private m_EmptyImage As Image
Private m_HoverImage As Image
Private m_ImageCount As Integer = 5
Private m_TopMargin As Integer = 2
Private m_LeftMargin As Integer = 4
Private m_BottomMargin As Integer = 2
Private m_RightMargin As Integer = 4
Private m_ImageSpacing As Integer = 8
Private m_ImageToDraw As Integer = 1
Private m_SelectedColor As Color = Color.Empty
Private m_HoverColor As Color = Color.Empty
Private m_EmptyColor As Color = Color.Empty
Private m_OutlineColor As Color = Color.Empty

Private m_selectedItem As Integer = 3
Private m_hoverItem As Integer = 1
Private m_hovering As Boolean = False

Private ItemAreas () As Rectangle

4. The properties of these variables into the process, although most of the process is fairly simple (get value, set value), but some of the process will require some additional code, I will discuss later.

5. Began to design and custom graphics code.

6. Finally, add a new event, such as clicking a specific control process or the requirements of the specific event.

The default value of properties with a specific routine

I want some of my properties

鈹?handling those attributes of color

鈹?reflect the control of other properties of the default values (such as ForeColor) and to reflect the user's system color of other values. For example, let us use only one of them can produce color HoverColor to see the default value of different methods.

The first is obvious, just in the variable declaration (or constructor) to set default values:

Private m_HoverColor As Color = _
Color.FromKnownColor (KnownColor.Highlight)

In most cases, this can work well, but there are two problems. The first question is, if the user running the application to change their system colors, how to do? After you restart the program, the control will reflect the correct color, but was not. The second question is, if the user to programmatically set the color to the default colors, how to do? There is no practical way to clear the color settings and set it to the appropriate system color. Users will naturally be set correctly for the appropriate system color, but then will return to first question. Another method is to color changes in the user's system when the traps, and the corresponding changes to your property value:

Protected Overrides Sub OnSystemColorsChanged (_
ByVal e As System.EventArgs)
Me.HoverColor = Color.FromKnownColor (KnownColor.Highlight)
Me.Invalidate ()







相关链接:



BI the NEW World: semi-finals games, who the winner?



Easy to change driving



Introduction To BREW SDK Papers (2)



comparison GRAPHIC Editors



Understanding encrypting file system feature of



How to write text to soft fast sellers?



C # event mechanism of Induction (B)



The new VPN strength



SIMPLE Games Arcade



Thunder Raise His Flag Charges, Cool 6 Has The Intention



OGM to MP4



FLV to PSP



OGM To MKV



Britain Invented The Robot Can Be Swallowed Pills Belly Detection Of Cancer



Tissot wave THROUGH the "Dakar"

Optic bound former president of EA games live on their own exclusive rights to operate

"The number of games the same time, to what income level, there are of course two sides agreed in the contract, otherwise EA will not give us the exclusive operator of the favorable conditions." E3 is the United States to participate in development of Yuet Yang Jing, chairman and CEO of the reporter says.

Recently, China has entered two years, has been "semi-concealed" the world's leading interactive entertainment software company Electronic Arts Inc. (hereinafter referred to as: EA) announced that, with the Guangdong Tian Yue strategic partnership, Tin Yuet made its online game products in China's exclusive rights to operate. - And this also means that the original luminous flux of CITIC Pacific's president, Tin Yuet-founder Yang Jing reappear.

During the interview, Yang said Beijing, Tin Yuet now created entirely from his personal funds, early in the game operator input to a 10 million yuan.

Blizzard than Ninetowns agent "World of Warcraft" paid 4,5 billion yuan, the game, "Johnson meat of your body," Gao De Ninetowns promising Blizzard "white workers" hidden dangers, the global market value of the highest Games EA, why is all their own products to the still in business during the Yuet exclusive carrier?

"EA Blizzard more attention than the Chinese market"

A few years ago, Ding Lei, founder of NetEase to the United States to learn from, in cooperation with the EA about the possibilities, it is very depressing to be the other side of "domestic piracy so much, how could the game to make money for the" A "kick" (Ding words) out, so Ding game soaring in NetEase, still adhere to "no door" principle.

Things have changed since October 2004 EA announced that it will set up R & D center in Shanghai, five years, plans to recruit 500 people since February this year, settled in their research and development studio in Shanghai's Zhangjiang High-tech Zone, EA is already in full swing in China a sign of offensive . - EA also said that in 2010 revenue from Asia, the game can reach one billion U.S. dollars.

With EA and Tin Yuet signed, EA's operating team also unveiled at the Guangzhou Tianhe Software Park - with its separated by a wall is Netease, Optic two major game manufacturers. EA confirmed that its operations teams are also being recruited in this war for talent "delicate" relationship, EA chairman with the Tin Yuet Yeung Jing said that the "will to comply with the rules of the industry, will open recruitment will not take the initiative to dig people. "

The same time, a reporter asked, "Blizzard and EA thought in China," not the same time, Yang said Beijing, "EA even more attention to the Chinese market, Blizzard just took Hans 'Warcraft' over, and EA set up R & D in China studio, will be putting in a lot of manpower and financial resources, localization of the game. "

The EA's choice of Tin Yuet Estate, after a great extent is the basis for cooperative engagement on both sides, past president Yang Jing as luminous when the two had the cooperation of casual games platform POGO been approached, the industry also has been reported that EA may acquire luminous flux, or both joint venture, EA injection of not less than 500 million U.S. dollars, but Yang Jing level of cooperation between the two sides in the capital, the news has been called "rumors."

"Policy of concessions we are soiled with NetEase's Light"

Yang Jing, but also acknowledged that the future of the Tin Yuet Estate Agent EA game, its the same time online, what level of revenue, EA and Tin Yuet Estate and both sides have agreed in the contract, "and the reason for all of our games exclusive operating conditions and because EA wants its carriers to focus on, and we will put a good addition to the type of game operations, and then touched upon other areas. "

It is understood that Yuet cooperation with EA, the first launch will be the EA's casual game platform POGO (www.pogo.com) the game platform is in the North American total of 140 million paying subscribers, is ranked first game in North America platform. The number of players for the attention of "FIFA" Online, "We are crashing, but specifically what time to publish, not be disclosed."

The same time, industry sources said the EA selection Guangdong Tian Yue, and the operations teams settled down in Guangzhou, one of the important reasons, but also because the Guangzhou municipal government on tax and other policy level on the online game company, more and more concessions But the Shanghai and Chengdu have been there for the game's first regional preferential policies, which Yang Jing said, "This is soiled with NetEase's light, after they have been on the preferential policies regarding the requirements of the Guangzhou Municipal Government for the proposed . "

"1 million initial investment has been enough"

Recently, join online games Shi Yuzhu has promise to "do not have a million play online games," In the interview, Yang said Beijing, Tin Yuet now created entirely from his personal funds, while the game is put into operation early as 1 million yuan.

"We are not involved in research and development company in addition to outside, and the different role-playing game, full of casual games is also a hot item, not up against the hundreds of thousands of users, from closed beta to open beta, then a formal operation , we can develop to form a loop through the rolling money chain. "

Looking back to the past, their history in the luminous flux of the practitioners, Yang Jing, said, "can only play 60 minutes," one of its experience can not be too confident: "A lot is not a game industry companies - also including the luminous flux, see the Web game to make money, to vote on, and the most terrible, is not the first war is not successful, but achieved little success after the rush to expand into, and not understand the game industry is still very deep water. In fact, the law of the industry, is worthy of our earnest study. "






Recommended links:



Host address changes by malicious shielding PPS



OGM TO MKV



A move into a digital video camera to camera



Computer change "broiler" the mercy of others



OGM to MP4



Unihub To come from behind



Shanghai university GRADUATES overall employment rate of 07 97.25%



Longhorn Beta1 only compatible with two kinds of graphics chips



Evaluate Games Action



Windows repair 2



Synthesis of effects using Photoshop filters distorted picture



PICKED Trace And Ping Tools



FLV To PSP

Approach new and successful

Recently, the theme of "run-up new and successful - PERA 2008" the year's successful completion of training students. PERA (PERA Global) 2008-year Zhaolu total of 40 final year students participated in more than a 4-day training; trainees from the Group's Shenyang, Shanghai, Nanjing, Wuhan, Xi'an, Chengdu, Guangzhou, Shenzhen all branches.

In the first day of training to meet the meeting, Mr Cheung, president of "what kind of person I am", "PERA Global is what kind of company" and "Vision" three issues have dominated the line, explained the company has initiated " to blend the traditional Chinese Confucian culture, philosophy is the body in order to learn from the advanced management of the Western spirit of "the" home "culture and" self-improvement, discipline and Social Commitment "personal philosophy. His interaction with the new staff to communicate with us encourage each other: I hope that every employee in the security world can the future success stories in the Asia-Pacific find that page from immature to mature, and the track record for success.


Together with the most brilliant smile to write tomorrow

This year's training in self-health training in integrated development challenges, team cohesion, and teaching vocational skills training to enhance the advantages of fast, in 4 days of training in cross-promote, so that new employees in the rational and emotional, respectively, with the future career a clear understanding. Variety of training programs, close feelings corporate culture, learning basic job skills, enhance the confidence of new employees do a good job and a sense of belonging, in which "self awareness", "basic vocational skills", "High Challenge", "team development "projects such as a chain constantly inspire each and every new employee self-challenge. Whether or not a successful challenge, the process is over because everyone filled cowardice, fear, doubt the pace is brilliant. 4 days of collective life have brought the regional, inter-departmental colleagues to promote mutual understanding of new, and forged a profound friendship.


Start listening in quiet new life

"When I saw other people, even to see their" This is the training of new employees, many of the personal experience, but also the Asia-Pacific security world, "new approach" purposes. And in the past hope to achieve group cohesion and execution to enhance the goals are different, the training focused on the future of these young professionals to provide more useful for their own career development training. As long as the world starting in the Asia-Pacific security, safety, and the World Asia-Pacific is willing to run an obligation to make this process more meaningful. Security World Asia-Pacific welcomes the choice of every new future here, "outstanding achievements", they are also welcome here as the "outstanding achievements" new starting point.







Recommended links:



Record 2 room to visit a new Generation of IDC



Zha Yufeng: Build "long Flight" Back Pillar



Joan Chen: "Nuclear high-based" special To be drying faster



Ps3 video formats



realplayer ps3



Adventure And Roleplay Storage



Infomation File And Disk Management



Bitter start, the RESULT of joy



flv to Wmv converter free



Specialist Anti-Spam And Anti-Spy Tools



Dell CEO or forced to replace him within a six Potential successors to the election



Ts format converter



OSPF Posts: Frame Relay OSPF-radio host



Wizard Art - Screen Savers



Facebook's growing pains



Business Is Business Had To Kind



FTP Site Preferences

CLP Guangtong proceedings to recover 200 million loan of China Cable

CLP Guangtong before the Beijing High Court sued cable TV network in China to pay a total of more than 200 million yuan, Ltd. arrears payment and penalty. The court has accepted the case on October 16, hearing date has been set.

The case stems from December 2003 19 Japan-China Electric Cable China Guang Tong signed a supply contract. The national radio and television line, and upgrading pilot project system equipment supply contract total purchase price of 309.64 million yuan, according to their contract, contact the Council under the project delivery time and volume of the number or the contract agreed to change the delivery date and batch number shipment contract equipment; China Cable are paid in three phases. The first phase should be in the equipment within 90 days after delivery to pay 85% of total contract amount equipment; the second phase should be completed joint testing equipment in the system within 10 working days after the payment of 10% of total contract amount equipment; The third period should be in the equipment within one year after delivery to pay 5% of total contract amount equipment.

CLP widely known, as of October 16 this year, the company under a supply contract requirements and verification has been sent by the China Cable goods worth 260.8 million yuan. Wired money to pay 78 million yuan in China, the outstanding loan 182.8 million yuan, according to the two sides agreed in the contract the purchase method of calculating liquidated damages penalty counted 50.5 million yuan.

Therefore, the CLP Guangtong the defendant to pay a total of 230 million yuan of defaulted loans and liquidated damages. CLP Guangtong said the trial the proceedings, the final decision or the result of the company's current profit after the effects of uncertainty.






Recommended links:



Kingsoft WPS Fans Will Debut Citation Shanghai Book Fair



Flv to mpeg converter free



Flv to mp3



"Dragon Century: Origins," Rogue gave him experience flow Culture



Video file converter



E-cology In The Micro-series 9 Pan



SIMPLE File And Disk Management



Smart set to speed up the decompression speed WinRAR



Comment Icons



COSCO Kawasaki's shipbuilding mode



Jiangmin response to the letter, Said attorney Alibaba China lagged far behind the law



Thunder RUTHLESS anti-piracy or abandoned by advertisers



ZTE false positive response to misleading reports exist



Psp 6000



Vertical Market Apps Specialist

Three 3G licenses which Zhang's most "money" way?

January 7, 2009, is a good day to be remembered. Because, on this day, repeated calls to the three 3G licenses issued, and finally to China's wireless communications technology with the world shoulder to shoulder, especially with independent intellectual property rights of 3G standard - TD-SCDMA, more is the global wireless communications technology in the pride. However, the more worthy of attention is fierce competition in the market economy and complex political environment in the world, "three 3G licenses, which Zhang's most have 'the money' way?."

By the International Telecommunication Union (ITU) in 2000 identified three major 3G standards: W-CDMA - also known as WCDMA, is Europe's proposed broadband CDMA technology; CDMA2000 - by the narrowband CDMA (CDMA IS95) technology development to the wideband CDMA technology, Qualcomm North America, led by the proposed 3G technology; TD-SCDMA - all known as Time Division - Synchronous CDMA (time division synchronous CDMA), developed by the 3G standard in China alone.

It is learned, 3G licenses is also known as "wireless communications and the Internet, combined with a new generation of multimedia mobile communications system operating license." In other words, only with the 3G licenses wireless communications ventures, to business and technical standards for 3G wireless communications services. In the three 3G licenses in China Fa Fang, China Mobile was independently developed by China's TD-SCDMA technical standards, China Telecom acquired from QUALCOMM CDMA2000 in North America Corporation Orientation Tichu technical standards, China Unicom made available in Europe wideband CDMA technology standard. Undeniably, these three 3G technology standard, is to keep pace with today's internationally recognized standard for wireless communications technology, in essence, may not have "distinction or" parts, there is fair competition, equality.

However, the reason I put forward the "three 3G licenses, which Zhang's most 'money' way" issue, not because of what the three existing 3G technology standard question, nor is it our three business viability of wireless communications there is little doubt, but with an alternative perspective of development thinking in the course of the future, there may be unexpected "external change" and allow us to "three 3G licenses, which Zhang's most 'money' way" and confused. In my opinion, should be noted that in today's global economic integration, market economy, the three will inevitably exist between the 3G technology standard for the user's "selective competition" and "service competition", particularly in China The large wireless communications market environment, competition for the user inevitably is very intense. Therefore, from the moment the three major operators in China, "User share" there is no doubt that China Mobile as the "User share" (80%) of the great advantages, it was independently developed by China TD -SCDMA technology standard, also laid this license is the most "money" passers-by license. Because such an arrangement not only to maximize the development of China's own TD-SCDMA technology standard gain maximum economic benefit, more importantly, also to maximize communication technology for Chinese users to get security. Thus, this is our answer the "why should this TD-SCDMA license to China Mobile" reasons.

Of course, if the above statements is difficult to explain the development of China's own TD-SCDMA this license the most "money" way, we might then predict from a political perspective this TD-SCDMA license the most "money" in other applications. As we all know, China is a "political principle" a very strong country, in which patriotism and nationalism (including the ultra-nationalist) sentiments, may break out at any time. Do not you see, in the past because of the Sino-Japanese Relations (Koizumi's Yasukuni visits) into a trough, the Chinese community broke out the "boycott" the strong "passion"; Do not you see, in the past because of the Sino-French relations (France humiliated and the Olympic flame Sarkozy met the Dalai Lama) into a trough, the Chinese community broke out the "boycott France goods" strong "voice"; ... .... The history has to tell us, who can guarantee that day will not be at the political level "diplomatic reasons" happened "to resist the 3G WCDMA standard in Europe" or "against the United States of 3G CDMA2000 standard" of patriotism or nationalism "aspirations" what? starting from such a fear, can alone can not explain the development of China's TD-SCDMA technology standard is the most secure? Do not prove this license TD-SCDMA is the most "money" way of licenses?

In short, the "three 3G licenses, which Zhang's most 'money' way", the only stand in the situation in China can see clearly and be able to find the answer. Remember January 7, 2009, China entered the 3G era, China into a 3G future, like we live in a more right!







Recommended links:



SuperBurner DAT to DVD



Comment Covert Surveillance



Christmasgift AVI to DVD



To do WITH Akoff Music Composer MIDI music (2)



Matroska format



DVD and Video Converter Pack



Youtube Video To MP4 Professional



convert flv to avi



convert dvd To wmv



Ever MP3 WMA APE to RA Copying



Youtube FLV Backup + Converter Freeware



avi to 3gp



Benchmarking Wizard

WorldCup 3GP Converter

WorldCup 3GP Converter is an All-in-One solution to create Mobile Phone 3GP movies from DVDs, TV shows and downloaded videos. The software combines DVD to 3GP Converter and 3GP Video Converter in one package for discounted price. The software is easy to use. It features superb video audio quality and the fastest conversion techniques availabe on the market (Up to 3x faster).

WorldCup 3GP Converter easy converts all popular video formats such as AVI, DivX/Xvid, WMV, RM, MPG, MOV, MPEG (and many more) videos into Mobile Phone 3GP format. Watch movies on the road. Support all mobile phones with 3GP video capability. The software is very easy to use. It compresses a full lengh movie into small size which can be fitted in a 128MB memory card. Carry your movie theater on the go! Watch movies anywhere, anytime - a new life style.



Recommand Link:



video file converter



how to CONVERT .mp4 to .avi



RER DVD to iPhone Converter



PianoBoy- VIRTUAL Piano VST



ApecSoft Audio Stripper



Catalogs Security And Privacy:



Happiness Flash To PSP SVCD MP4



Music Catalogue Master



MP3 To AC3 Pro



Easy to use Clipboard Tools



X-Cloner AVI to MPEG



Convert Dvd To Psp



video Formats



Swift AVI PDA MP4 Encode



Easy to USE Dial Up And Connection Tools